Peel And Stick Butyl Rubber Waterproofing Membrane Strong Adhesion Easy Construction

Peel And Stick Butyl Rubber Waterproofing Membrane Strong Adhesion Easy Construction Adapt To Various Roof Shapes

Product Description

Butyl rubber waterproofing membrane is a single-sided or double-sided self-adhesive membrane mainly made of butyl rubber and coated on reinforced aluminum foil and corrugated aluminum foil. This product has strong adhesion to the surface of various materials, especially suitable for color steel tiles and roof cracks. It has excellent weather resistance, aging resistance, and water resistance, and can seal the surface of the adhesive. Shock absorption, protection, etc. can remain uncured during the service life, thus having a good follow-up effect on the thermal expansion, contraction, and mechanical deformation of the adhered surface. This product is completely solvent-free, does not shrink, and does not emit toxic gases. It is an environmentally friendly solvent-free waterproof sealing and adhesive material.

Product Characteristics

• lUnique bonding creeping property, bonding with concrete, can penetrate into the concrete pores thoroughly to ensure that no water leakage will be formed due to concrete cracking.
• lExcellent mechanical properties, high bonding strength and tensile strength, strong elasticity and extension properties.
• lStable chemical properties, excellent chemical resistance, weather resistance and corrosion resistance, UV resistance (sunshine) ability, up to 20 years of service life.
• lSimple installation, safe and environmental protection, free of volatile substances, non-toxic, tasteless. It can be installed at a low temperature of -5°C. The cold adhesive construction is safe and environmentally friendly, convenient and fast.

Construction applications

• Substrate Preparing: remove the protruding sharp corners and rubbish on the substrate;
• Apply the primer (if necessary): the old color steel plate needs to be painted with the supporting water-based "rust-free primer";
• Large area installation: align the tape with the reference line, and roll it forward and to both sides with a rubber roller to discharge air;
• Overlap: Use pressure rollers for firm overlap;
• Detail treatment: strengthen the details treatment according to the requirements of the specification;

Scope of Application

• Roof waterproofing, underground waterproofing, waterproof treatment of structural construction joints and short edge lap or detail treatment of pre-applied waterproof membranes;
• Sealing and waterproof treatment of construction joints of elevated, subway and tunnel structures in municipal engineering;
• Airtight, waterproof and shock-absorber at the joint of the color compression plate and the joint of the sunshine plate engineering;
• For bonding cement, wood, PC,PE,PVC,EPDM,CPE materials;
• Applied for the waterproof airtight treatment of the joint, the termination part and the special-shaped part of the waterproofing project;
• Applied for the airtight waterproof treatment of the doors and windows of the civil residence, the shock absorption and bonding seal between the floors, the airtight waterproof treatment of the ventilation ducts and the architectural decoration;
• Treatment for metal plate roof, cement roof leakage ; Overlap between the steel roof color steel plate and lighting board , and sealing treatment on the gutter joint , steel warehouse, granary, cabinet.

Weifang Haobang Waterproof Materials Co., Ltd.